Originally Posted by
Lazer Guy
Thanks again Scott ...I will try the changes you suggested.
inconceivable
I ran the 0* front block on carpet and my car was very twitchy, I added 1mm wheel spacers to make the front wider and my car was not twitchy at all and drove very nice. I had to keep the wheel nuts tight with the 1mm spacers.
Sometimes the 0 block makes more initial turn in especially when you have lower roll center in the front.
I would recommend you to move the spacers on the inner hinge pins to make the wheel base shorter (front a-arms will move toward back) when you have 0 block in the front. This will reduce the front drive shaft (cvd) sweep angle.
I hope it helps.