Originally Posted by
B18C Turbo
I need some help for assphalt setup, the car keeps coming around, stepping out and then doing a 180, drifting etc...this is on corner entry and exit.
My current setup:
1.5 neg camber all around
30wt AE oil all around
Gold/silver springs
3mm under front ball studs
2mm under rear ball studs
2.5 degree front pivot block
3 degree rear block
no roll center shims
1.6mm front sway bar
1.2mm rear sway bar
4.5mm ride height
6mm front droop
5mm rear droop
Muchmore 24 R premounts
My set up is similar, I have .5 deg of toe, 1.5mm of shims under all the toe blocks, 2.5 toe block in the rear, and 1.5 toe block in the front, copper sway bar in the rear, silver up front, 2mm of ackerman..
24's? How cold is it over there LOL? Thats a soft tire! Are you sure you arent overheating them? That will cause the problem you are having... Maybe try 28's, or 32's