Run the B2 front brace. You will need to modify the bulkhead a bit and will need longer hinge pins. I ran an 86 spur Kevlar Spur rather then the plastic 84. On the 86 spur youll need to shave down under the spur to fit properly. Change front belt to a green instead blue. I also ran the MIP CVD's in it. Also make sure you run the outdrive rings on the composite outdrives. You will need to grind down the CVD pin a bit not much. And lastly run the saddlepack on driverside all the way to the front. Just run the WE setup on it.