R/C Tech Forums - View Single Post - Hitec servos with KO Propo Receiver?
Thread: Hitec servos with KO Propo Receiver?
View Single Post
Old 07-19-2003 | 07:22 PM
  #2  
minicooper's Avatar
minicooper
Tech Fanatic
iTrader: (5)
 
Joined: Aug 2001
Posts: 949
From: Beautiful Downtown L.A. Where the sky is always on fire and the grass is always brown
Default
Yes you can. You'll have to check the wiring order of the servo. For a KO the red (positve wire) should be on the outside, the black (ground wire) should be in the middle and the signal wire should be the inside wire.

Last edited by minicooper; 07-19-2003 at 07:29 PM.
minicooper is offline  
Reply