Originally Posted by
karlo511
i've been running this set-up
http://www.petitrc.com/reglages/hotb...etup200712.pdf
but i made the following changes:
front block = F 1mm R 1.5mm
front droop = 6
front oil = 40wt
front spring = hpi white
rear droop = 6
rear ride height = 5.3
rear oil = 30wt
rear spring = hpi pink
tamiya red foam on top of bladders
front suspension arm spacer = F.5mm R 2mm
rear suspension arm spacer = F 2mm R .5mm
rear upright spacer = F 2.75mm R
other things to try:
1.2 mm front sway bar
reduce the rear toe-in block to 2.5
thanks dude. im going to print this out and look it over.
ive seen your cars they're always very stable in low traction tracks like Corona and LM.