Originally Posted by
kavadni
I can confirm that the arms (# 51217) which come with the TT-01D does have holes for grub screws to adjust set downstops. Just take note that if you are using plastic axles and dogbones, you can not access them to adjust them. You need to install smaller metal axles and dogbones or universals.
I race on carpet and find the TT01 taily under brakes, I run barely a 1mm of droop at the rear and about 3mm at the front, this helps to keep the weight on the rear wheels under brakes.
Kevin
i disassembled the upper arms and removed the dog bones to adjust the downstops.
Current settings (and my 1st time):
Downstops: F=5mm / R=4mm
Droop: F~1-2mm / R~2-3mm
ride height: F=6.5 / R=6.5-7mm
very short and limited testing showed that it is more responsive in steering and did not hook or oversteered. will do more testing this week and plan to have less droop on the rear and also want to lower the ride height
any other set ups or comments are appreciated
