Originally Posted by
SRW141
Thanks for the info. I will be racing at 301 Raceway. I use Byron 30% fuel. I'm breaking the engine in as DJ posted on nitrokb.com. I had to richen the high end 2 turns (past factory setting) to keep it below 300 for the 1st 3 tanks at WOT. I've heard this engine runs hotter than most.
When breaking in the JL EVO 3 engine all you need is one tank at idle just to break in the connecting rod, on the the second tank you can already race tune the engine, don't have to do the WOT, it is not necessary for JL EVO 3 engine, you do the WOT only if it is a Nova Rossi.
