Originally Posted by
KRCRacer22
Adviseable upgrades out of the kit:
IF348-1016 - Rear Blue Springs (Stiffer)
IS106-816 - Front Blue Springs (Stiffer)
IFW338 - Stronger Servo Saver Spring Set
Adviseable set-up advise:
- Put foam under the tank to where the weight / force of the front part of the tank is actually pushing upwards toward the screw that is holding it down.
- Shim the diffs when new to where there is ZERO side to side play and there is a slight notchyness when built. Once broken in they will feel like butter!
Other than that, please enjoy the best truggy on the market! ;-)
I just placed my order for this truggy. I also ordered the parts you listed, Tony's Screws, diff shim kit, and fat boy o rings for the fuel tank.
I hope this truck is better to me than my Losi. I race allot indoor in 30 degree temps during the winter, so it will be interesting to see how Kyosho plastic holds up to the cold weather.
Never broke a part on my Losi that wasn't a clutch exploding or servo dying, so if the Kyosho solves those 2 problems I'll be good to go
