I got it running decently yesterday. Replaced the front bearing, basically ground the idle needle to a fine point (because polishing it obviously wasn't enough), polished the barrel with emory cloth this time, resealed EVERYTHING, new fuel line and the Ofna/Picco hot plug (#51006). Was running the Trinity "Drake" plug. Using the Jammin JP-4 pipe and Byron Gen2 20%, going to try the 25% or 30% this weekend.
The tune held okay, it takes quite a while to warm up. Once it's at about 240-250 it has a ton of power. I will run this one and move on to something else when it's time.
Thanks for your help.