R/C Tech Forums - View Single Post - Serpent 705
Thread: Serpent 705
View Single Post
Old 07-09-2003, 07:32 AM
  #2527  
superk
Tech Fanatic
iTrader: (8)
 
superk's Avatar
 
Join Date: Feb 2002
Posts: 852
Trader Rating: 8 (100%+)
Default

I see some car mount their rear shock on the a-arm instead of the upright?? what difference does it make?? Here is what my car setup likes

Front:
Camber: -1
Caster: 2degrees
Swaybar: 45 degrees
Toein: 0
Shock oil : Serpent 30 , click hole 3 (2nd softest)
Shock Spring : Yellow
Shock mount : 1st hole (from the inside)
Ride hight: 6mm
Droop: 0
tyre: 40shore 26mm
diff: Lock diff

Rear:
Camber: -2
Swaybar: factory one I think 2mm
Toein: 2 degrees
Shock oil: Serpent 30, click hole 3(2nd softest)
Shock sprint: Orange
Shock Mount: 1st hole (from the inside)
Ride hight: 6mm
Droop: 7mm
Tyre: 40shore 30mm

That's all...it seem likes... I try to tight up my rear diff all the way but..some how...with my hand I hold the gear and one tyers and try to spin the other tyers and it seem to move a little (very tightly) is this ok. Thought the diff might be too loose.

Any ways...help me with my setup problem.
Thanks
superk is offline