Seyruuen

iTrader: (14)

Jammin X1-CRT PRO Kit Roller

IS SOLD!

This truggy is incredible, immaculate condition, only raced half a season and two national events. The spares package at retail is worth well more than what you'll pay for the whole lot. I have always taken very good care of my race cars, and this is no exception, bearings are all in good condition, everything has been checked and rechecked, parts that were slightly worn were always replaced long before they broke etc.

The difference is often not appreciated, but this has been owned by a meticulous (possibly obsessive compulsive) racer, and NOT bashed in the backwoods, hosed off then sprayed with WD40 + Air compressor.

Parts package includes:

Flywheel with silver shoes and springs - good condition
13T Clutch bell with bearings - fair condition
Blue clutch shoes - good condition
Flywheel 35mm - NEW IN PACKAGE (MSRP $19.95)
Clutch Bell with Bearings - NEW IN PACKAGE (MSRP $19.95)
Brake pads 4 - NEW IN PACKAGE (MSRP $11.95)
CVA Shafts with CVD 2 - 1 NEW, 1 Bent (MSRP $49.95)
Sway Bar 3mm - NEW (MSRP $4.95)
Fuel Filter - good condition (MSRP $5.95)
Shock boots 3 - NEW (MSRP $4.95)
Wheel lock nuts 7 (plus 4 on the truck) good condition
X1 CRT Screw Kit - NEW (MSRP $29.95)
Transponder mount - good condition
Cross pin axel for Diff - 4 Pkg - NIP (MSRP $ 3.95 x 4)
Silicone Shock Cover Set - NIP (MSRP $5.95)
Small Turnbuckles - 2 Pkg - NIP (MSRP $6.95 x 2)
Center Diff Post mounts - NIP(MSRP $8.95)
Brake Cams - 2 Pkg - NIP (MSRP $8.95 x 2)
Yellow Spring Set - NIP (MSRP $11.95)
Mud Gaurds - NIP (MSRP $9.95)
Upper A-Arm 2 Pkg - NIP (MSRP $9.95)
Front C Hub - NIP (MSRP $11.95)
Rear Upper Mount and Hubs Tree - NIP (MSRP $9.95)
Body Post and servo Mount Tree - NIP(MSRP $9.95)
Misc bag of Plastic parts, nearly every spare -all good condition
Diff Fluids, Various Weights - 9 Bottles - good condition
60 Wt. shock -1/2 bottle
ProLine Holeshot MTRs mounted on ProLine wheels 90% Tread - 4
ProLine Holeshot MTRs mounted on OFNA wheels - 60% Tread - 2
OFNA Truggy Wheels, white - NIP (MSRP $15.95)
ProLine Holeshot MTRs - NIP (MSRP $22.85)
LPR white wheels (on truggy) - NEW (MSRP $15.00)
Spare wing - abused condition, rocking my graphics (priceless)
Air Filter Housing - 2 - fair condition
Air Filters -5 - fair condition
Air Filters -3 - dirty
Custom painted truggy body, one race, good condition no stickers.
Spare A-Arms - 5 (3 front, 2 Rear) - NEW (MSRP $19.95 x 2.5)

The car has new bearings throughout (one weekend), new steering bearings, new brake pads (one weekend), a new fuel filter (one weekend) and the shocks were rebuilt one weekend ago also when I went through the truck before the SSNTC. Setup is perfect in my opinion. Slap in your electronics and a motor and throw this thing down on the track.. you wont need to visit a hobby shop or worry about going home early due to a break.. just drive.

Asking $SOLD (firm) interested only in trades that include an HPI Baja 5b (would add cash or other trades to even it out). Would much rather sell this to a newcomer to the sport than a hobby shop looking to retail the parts.. Thank you!