Originally Posted by
gewaun
Can anyone help me? I need the factory carb. settings for the hsn and lsn for breakin, I lost the settings and can't get the engine started. 15 seconds idle is as far as I have got. I'm also using a heatgun.
the base settings for the three port R-spec are
topend 3.25-3.5 out from fully in
bottom 1 turn in from flush
you may find these are a tad rich on the bottom so try 2 from flush on the bottom
I've got about 15 tanks through mine so far and I still can only just turn it over by hand when it's out of the buggy so take your time
at 15 tanks I'm at 2.75 from fully in on top and 1.5 from flush on the bottom still heaps of smoke through the range running about 230-245
hope that helps
Adrian
