HSN Flush
LSN 2 turns in from flush

Justin, i ran Garretts motor in for 10 tanks, after that i put a concervitive race tune on with foil on the head, still very fat and lots of smoke all the way through the pull, no tight pinging durung running=long lasting rod and sleeve, i would lean it out more if it's only 210 with foil, that temp is kind of defeating the purpose, you hear guys running them at 250 durung the 1st gallon but being easy with throttle inputes, just my 2 cents bud

Gewaun, that setting will give a great idle during breakin, and adjust the hsn so it will stay at 200 or abouve with out a heat gun, and then keep the heat on it, and use foil. I posted my breakin methode a few pages back your welcome to look at it, i do all my GO's this way. Good luck