Originally Posted by
ma racer
will do captain. thanks. Any clue as to a reference point? The ol XR is worn from only one season of mild to heavy use. temps under control etc. but became hard to use so I took it to a local Max Power sponsored driver and he recomended an internal rebuild. Should I keep the stock shims in place? 30% nitro,,,in Houston no less. Thanks,
Hey MA racer, I would chek the deck height with solder and see where your at first before doing anything with the shimming.After knowing that, you can see if your to high or to low. I sauly run anywher from .021-.024 in my stuff with 30% in Houston. If you need ant help just ask man, no problem.
