R/C Tech Forums - View Single Post - Corally Phi Thread
View Single Post
Old 02-24-2008 | 03:29 AM
  #98  
s.nicholson's Avatar
s.nicholson
Tech Addict
iTrader: (2)
 
Joined: Jun 2006
Posts: 672
From: Sydney, Australia
Default

Originally Posted by mazmo
Hi Guys,

Recently got my Phi, it's nice but am having some issues with oversteer ... mainly on throttle and corner exit.

Have tried changes in the following order:
- harder front springs 19pound (17 on rear)
- lengthen rear camber links
- lay rear shocks down one position from kit.
- Introduced kick up at front (turned front couplers over)
- Higher roll centre on the front using couplers ('dots' up all front couplers)
- Thought I may have had to much 'all round grip' so changed to hardest
springs (front 24 & rear 22).

I have no sway bars, ride hieght 5.5 all round, used xenon 36 tyres (hot day).

I seemed to gain some improvement from increasing front roll centre change, however overall problem still there .

With all set up changes, the oversteer problem became worse after a few minutes into the run.

Would appreciate any advice you may have guys.

Cheers
You should try sway bars it will settle the car down alot, also from what ive heard the xenons have alot of steering prolly to much taking away rear grip, that could be ya problem most likely
s.nicholson is offline