Originally Posted by
grizz1
Hi Brian, great info on those pipes. Does the above apply to the 5 Port Turbo as well. I have both 086 Dynamite and GO 2047. Track I normally run is reasonably smooth, but often has some loose dusty stuff on top and in the corners. I am tending towards the 086 in the buggy going on what you have said, maybe with a 7mm restrictor as well to tame that 5 Port bottom end even more.
I have just ordered an LRP 2063 from Massive Mods for the 5 Port Turbo in my Truggy. I have been running the 2047 but it would appear that the LRP pipe has a bit more low end torque for the Truggy. Will be fun finding out
I don't know much about the 2063, but i can say that after seeing what a modded 5 port can do in truggy with a 086, i just cant see needing more, unless you race on a very high bite track, even then, they can be a handfull, a good friend of mine Kevin runs last years modded PTM 5 port, at our indoor track with a 086 on it in a X Ray truggy, he was literally pulling the front end up on that thing, i don't think you need more bottom. Just my 2 cents worth.