I normally change out the bladders if the rebound will not push out the same................I use a Yokomo Bladders for different track condition............On all my kits...They are much better than the Tamiya Bladders(well IMO). I use Shock slime as well to keep in a seal.......helps out alot....I haven't tweak a shock since.
O-ring Rayspeed (so many to choose from)
Bladders Rayspeed (sweet from soft to hard)
Foam Hpi/Rayspeed/Yokomo (soft to hard, thick or thin)
I also use the Tamiya Shock Machine....pulls out all those air bubbles
Super smooth Shocks.....
All Purpose has been a very good body to run.....I perfer it over the MSP6 or 6.....
Although I would like to try the Kyosho Stratus...the Nose is lower.
As far as steering goes......other than a good "throw postition" the steering is pretty good......maybe a shim here or there...on the Ackerman.
This weekend I am going to run the EVO5 arms.....
I will be shimming the suspension.....from its sloppy behavior.....More so the 3racing Hubs.....I have .2mm shim under the top Cup, this stops that up and down play in the steering block.
Going to try some new grip as well.........and loosen up the bearing just a little more........
See ya at the track Sunday JMAC.
Last edited by m3ndo5a; 02-07-2008 at 03:30 PM.