R/C Tech Forums - View Single Post - ASK Ronnie Gardner(Kyosho Electric Offroad)
Old 02-05-2008, 02:40 PM
  #113  
RonnieGardner
Tech Adept
 
Join Date: Dec 2005
Posts: 106
Default

Front:
3-B Pistons
35wt Losi Oil
Orange Front Springs
No Limiters in shocks with shock ends unthreaded 4 turns
25 degree kick-up/no spacer used
Shocks mounted in middle location on tower and outside location on the arm
2-B Camberlink with no washers under the ball stud (middle on bulkhead/outside on caster block)
Spindles in upper position
1/4oz of weight under steering rack

Rear:
3-a Pistons
271/2wt Losi Oil
Dark Yellow Rear Springs
No Limiters in shocks with New W5183-02 Shock Shafts (54mm) (The stock RB5 shock shafts are 50mm and are too short...do not use)
Shocks mounted in middle location on tower and inside location on New LA243 arm
2-B Camberlink with no washer under ballstud on shock tower brace and 1mm washers under ball stud on hub
(middle on shock tower and outside on hub)
Hubs spaced in the middle position
Hub height all the way down position
Stock Anti-Squat (2 degrees)
1 oz under rear tower


Extra Info:
Battery Position - Forward
Ride Height - 25mm Front / 23mm Rear
j concepts mid wing
RonnieGardner is offline