R/C Tech Forums - View Single Post - Yokomo MR4TC-BD w/ tons of Parts
View Single Post
Old 02-03-2008, 05:33 PM
  #1  
yyhayyim
Tech Elite
iTrader: (26)
 
yyhayyim's Avatar
 
Join Date: May 2006
Location: Weston, FL
Posts: 3,424
Trader Rating: 26 (100%+)
Default Yokomo MR4TC-BD w/ tons of Parts

Selling a Yokomo MR4TC-BD roller chassis and a ton of spares, most are new and in bag. THe car is in really nice condition, with a super smooth drive train. The car is realy nice to drive and will make you look really good, fast. the chassis does have some scratches on the bottom due to ourtdoor asphalt racing, which is expected. Here's a list of spares:

NEW PARTS
IN FACTORY SEALED BAGS

1. rear belt. (low frictiom): BD-189L............................................$6
1. front belt. (low frictiom): BD-516L...........................................$8
1. Diff Joints / Drive Cups: SD-501..............................................$ 5
2. HD GRAPHITE Lower Suspension Arms. SD008HG.....................$11.50. e/o
1. Lower Suspension Arm: SD-008.................................. ............$7.50
1. Hard Front Steering Hub Carrier (4 Deg.): SD-4134H.................$6
2. Suspension Hinge Pin Set: SD-009...........................................$7. e/o
1. King Pin Set: SD-414............................................... ...............$3
1. Lightweight King Pin Set: SD-414TA.........................................$6
1. Front Steering Block Non-Trailing: SD-415S..............................$6
1. Shock Maintenance kit: YS-7-1................................................. $5
1. Fr & Rr Diff Joints: ZS-501............................................... ........$5
1. Graphite Steering Bell Crank Plate: BD-202G.............................$12
1. Low Friction Universal Bone: SD-010LSB...................................$6
8. Hub Carrier ball bearings: 6x10x3 mm.....................................$14
4. Hub Carrier ball bearings: 6x10x3 mm. Rubber Shield...............$8
1. Rear Universal Driveshafts HARD: SD-010RH............................$55
2. Univ Coupler & Drive Pin: ZS-010TP..........................................$3. e/o
1. Diff Rings: ZS-506............................................... ...................$3

NEW PARTS
OPEN BAGS

Only 2 in the bag of 4: Long Ball Studs 2 pcs: ZC-206L.................$1.40
Only 1 in the bag of 2: Front Steering Block: SD-415....................$3
Only 3 in the bag of 4: King Pin Set: SD-414................................$2
Servo Saver Horn Set: SD-200H.............................................. ....$7
1 - Rayspeed anti-roll bar: RS-25................................................ $9
3 - Front One-Way 40T Pulley (2 instaled) 1 spare. BD-643............$5.e/o
1 - Differential assembled. with Ceramic Balls. Si3N4-Silicone Nitr..$30

ALSO INCLUDED Are these EXTRA TUNNIG PARTS

1 - Aluminum rear susp mount: SD-300R25. 2.5 TOE-IN...............$19.50
1 - Aluminum rear susp mount: SD-300RR3. 3.0 TOE-IN...............$19.50
1 - Aluminum rear susp mount: SD-300RR2. 2.0 TOE-IN..............instaled
2 - Spring steel solid axle "spool" (perfect for prectice)................$30. e/o
1 -Aluminum front solid axle "spool" 3 piece. light......................instaled
1 - Delrin diff outdrives with Ceramic Balls. Si3N4-Silicone Nitride..instaled
1 - HD Front One-Way Assembly. BD-640T...............................$45
1 - 008HG HD GRAPHITE Lower Suspension............................... 11.50

Theres over $340 in parts, and the car comes with Titanium screws through out, and delrin white CNC machined rear diff outdrives already installed.

Its a really nice car and with loads of spares and option parts. The Yokomo BD is very light and tough, and has lightning quick accelerations and very free and smooth drive train. its ready to race and you'll love this car...

Asking price: $399 shipped within USA, OBO. International: $425, OBO.
Paypal preferred... No trades at this time, please...

Pics are being worked on and will be posted on soon...

Paypal
yyhayyim is offline