R/C Tech Forums - View Single Post - Soldering Question with Mamba Max
Thread: Soldering Question with Mamba Max
View Single Post
Old 01-27-2008 | 05:42 PM
  #1  
biaachmonkie
Tech Initiate
iTrader: (3)
 
Joined: Dec 2007
Posts: 36
Default Soldering Question with Mamba Max
Sorry for the double post, the page wasn't responding and I hit submit again, and then both showed up.

---

I want to solder the motor leads directly to the ESC, the supplied ESC wires plus connectors are just way to long for my needs.

My problem is that I can't get the solder to melt on the ESC motor leads, the heat just gets sucked into the ESC and out the heatsink. It comes close to melting but not quite. I've got a weller WLC100 (40W) iron, I've tried both pencil and wedge tips, and it just doesn't seem to be able to deliver enough heat fast enough.

So I'm looking for a more powerful iron and was looking at the Weller SP80L ...

http://www.cooperhandtools.com/brand...c=037103169167

Can anyone who has worked with the Mamba Max please comment what kind of soldering iron they used with it, or if there is something I'm doing wrong.
Last edited by biaachmonkie; 01-27-2008 at 05:44 PM. Reason: double post
biaachmonkie is offline  
Reply