Here is what i can tell you from looking at the motor apart. The exaust is done the way i was hoping, it's not closed off like a stock 3 sport motor. The crank is cut very clean, the inside of the case is very nice as well. The machine work resembles trhe 5 and 7, releived boost port in the case, and the sleeve is very nice as well, nice big transfers and boost with the 2 bypass ports, the cooling head is very nice, and the cuts in it look just like the 7 ports, the 5 ports will have the same cuts as the 7 as well. if i get a chance i will be breaking this bad little red head in this weekend. And of course it's a TURBO This is what i will start off with for breakin and testing.

GO 3 port RACE SPEC 8mm insert, STOCK
GO 2047
Rocket Science 30%
OS P3
RC8, with all 1.0 and M2C Hard Standard shoes