Originally Posted by
AdrianM
If you ran Zero timing (AMTS Setting #1) you were way under timed and probably under geared. I ran my Novak 10.5 at 4.8 FDR and it didnt get too hot.
I would leave the gearing the same (5.18) as start walking the timing up to the default setting of #6 (18.75*). Don't worry about temps until you get close to 180*F.
Thanks Adrian...yep, I did run the zero timing(setting#1), like you said...and I'll go ahead and kick up the timing and see how it does w/ 5.18FDR...
What about using 7-8 on the throttle profiles? Will this give more power/speed?