R/C Tech Forums - View Single Post - New Ener-G 4600 Ni-MH Cell
Thread: New Ener-G 4600 Ni-MH Cell
View Single Post
Old 12-28-2007, 12:27 PM
  #247  
Josh Hohnstein
Tech Master
iTrader: (3)
 
Join Date: Nov 2003
Posts: 1,789
Trader Rating: 3 (80%+)
Default
Originally Posted by trilerian
Well, hopefully I get to try these packs again tonight. Currently charging at 7amps with 3mv cutoff per cell. Pack comes off charger at 114 degrees F. Packs are taking just shy of 4600 mah when charged. I am going to try 4mv cutoff to bring the temp up just a little more and to put back 4600 mah in the cells. The numbers are coming up though, cycling at 35 amps; average voltage is 5.05v resistance is 5.1 (4-cell).
So what your saying is your cells are are 1.26 average voltage at 35 amp discharge I think you need to recheck your numbers.
Josh Hohnstein is offline  
Reply