Originally Posted by AdrianM

Sure...I will cover all the settings noting what is unique about the speedo in bold.

Note that this is the only BL speedo with a hand held portable programming tool included in the purchase price.

This tool allows you to:

1. Set Forward with Brake or Forward/Reverse with Brake. It is to only Forward and Reverse capable Unlimited RACING speed control.

2. You can set the drag brake to 0,5,10,15,20,25,30,40 or 50%. These are finer steps than any one else has.

3. It has adjustable Lipo cut off thresholds of NONE, 2.6, 2.8, 3.0, 3.2 and 3.4V per cell. No other racing speed control does this.

4. It has 9 start modes that give linear or progressive throttle control at motor start for adjustable punch off the line. The lowest setting is like a soft start (could be used to racing concrete oval with cap tires) and the highest setting is like having 100% throttle when you touch the trigger.No other racing speed control does this.

5. It allows max brake force limiting at the speedo instead of using your brake endpoint. This can be set from 25(weak), 50,75 to 100% (full speed). No one else does this.

7. It allows you to adjust you minimum brake like other speedos.

8. It allow you to set your throttle channel dead band to 6,9 to 12%

9. It allows you to set your motors timing advance electronically between 0-26.25* in 8 steps. No other sensored racing speed control can do this.

10. It lets you set the speed to BL Motor operation, Brushed Forward only and Brushed forward /reverse.

11. It lets you enable and disable the thermal cut off feature.

All of this can be set in seconds with the programming tool. A key to all the settings is printed on the programming tool so everything is right there when you need it.


Its just AWESOME!