Originally Posted by
Brian McGreevy
syndr0me,
How are you gearing the LRP compared with the Novak with those rotors? Same? If so, how many more teeth are you going up with the 13 mm rotor over the std. rotor?
I believe I geared the LRP 13.5/sintered and the Novak 13.5/13mm-sintered almost exactly the same.
With the standard rotor and NiMH, I found myself around 40-41mm rollout. With the 13mm, it was closer to 45-46mm. That's just ballpark, but it sounds like other people are in a similar range. You're probably smoother on the throttle than I am, so you might be able to pull more gear. If you're using LiPo, go up a few teeth to account for the voltage difference.