R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 12-18-2007 | 04:34 PM
  #869  
Jason Halvorson's Avatar
Jason Halvorson
Tech Elite
iTrader: (22)
 
Joined: Apr 2007
Posts: 3,955
From: Grand Forks ND
Default

Originally Posted by RETRO RC
Hey Jason,

I was just wondering how new the 7pt was, is it turbo and also what header you where using as the 2047 with a medium or long header gives me more bottom end on my 7pt turbo in an 8T than I can use as a rule and also run time of between 8-12 min depending on track carb restricter etc but the engine took about 5-7 ltrs ,almost 2 gallons to really open up

novarossi #6,#7, odonell 97t or OS P3's have all worked really well plug wise
with the nova #6's being my prefered

I also use the TT 2035 pipe set with a short header and have have good results with that also

Adrian
the 7port is very new only has betwen 1/2 and 3/4 gallon on it...i had just removed the break in shim, since then i have driven about 8 more tanks on the 7port and the bog is getting much better as i get more runtime on the engine...i also switched to a Nova #6 and it helped alot, there is pretty much no bog left...

i was running the stock header that comes with the 2047, but i have a few RB headers on the way, so when they get here im go do some testing with them on the Go 2047, and the RB 2045...
Jason Halvorson is offline