Originally posted by alana07
hi to all M1RR drivers,
need your input here. i recently installed the m1rr setup in the rear of my v1rr, its a LOT of difference in handling. v1rr rear droop was 6mm on hudy guage, m1rr was set to 6mm also, upper link's shim was tested using 4mm and it makes the rear loose. reduce the shim to 1mm and its better but not as stable as v1rr setup. next change was to reduce rear droop to 5mm with 1 mm shim, getting better but still not as stable as v1rr setup. so any advice on how i should proceed from here? the track is layed on a tennis court with good traction and minor bumps. thanks in advance.
alan.
some of us end up using 3mm shims and it works pretty well.
start using 2mm front and 8 mm rear droop and adjust from there