I hope this works for the guys that e-mailed me. Track SpeedWorld TESTED on both conditions - smooth, tight, high traction w/ VHT and clean no spray asphalt.

Front End:
198mm width
4mm ride height
2 deg camber angle
2mm upper arm spacer
.5 toe out
1mm rebound stop
no bump stop
use to138 steering blocks w/1mm spacer on steering arm
front sway bar flat

Rear End:
199mm wisth
5mm ride height
5 camber angle
1.5 toe angle
3mm rebound stop
no bump stop
lower arm position
2mm upright spacer
2.5 wire roll bar
3mm in on wire sway bar ball
0 wheel hub spacer
use to144 mounted on lower hole

Frt Shock
stock piston
600 mugen oil
springs light blue
middle postion shock mounted

Rear Shock
stock piston
600 mugen oil
springs light blue
3rd from the bottom shock mounted

Front - One way

Steering Ackerman -- A

Rear Diff -- 50,000

Tires 40 front and 40 rear ----- I use Jaco

Body - Protoform Stratus and stock wing

Good Luck Billy