Originally Posted by
Scottrik
I've installed the Losi LiPo transmitter pack in my M11 and am VERY pleased with it thus far.
Something that DOES puzzle me a bit is that Losi recommends not allowing the voltage to fall below 11.1v where my understanding is that LiPos are GENERALLY good as long as they aren't discharged below about 3v/cell (9v in the case of a 3-cell tx pack). When I asked about this on the Losi customer service line they said something about this being the 90% charge point or something.
Anybody have some insight?
tia,
Scottrik
each lipo cell has a minimun of 3.7v and the battery should not discharged less then that. 3.7 by 3 is 11.1 so dont go lower than that or you will lose battery life and it will take less charge. ask apogee or vxr there are makers of most lipo even losi lipos