Originally Posted by Teehomo

I've just given it a run up and down my street and found that it is not very stable in a straight line - it seems to want to wander of its own accord. I'm running a Futaba 3010 servo with the stock standard servo saver and a bit of toe out. I can't really measure the toe out accuratley as my setup guages are a bit big for the mini's width, but I shortened the turnuckles up a couple of turns each side over the stock set up. Everything else on the car is standard, except for a set of CVA shocks from a TA05 (with spacers under the piston and short springs to reduce ride height).