Originally Posted by ChestyV32

Here is my final setup from the FCC race 4

FRONT
.020 springs
-1.5 camber
4 deg caster
.5 deg toe in
10 deg upper arm mount
flat servo medium ball stud (black)
3.5mm front ride height

REAR
30wt shock oil
Windtunnel Silver spring (one pound heavier than gold)
1mm pod droop
black ball stud under front of shock
.068 flex plate
set screws in but not touching
batteries forward
4mm ride height rear
172mm rear width
15000 wt dampner fluid wind tunnel #4

SPeed 12 body
Jaco prizms front-Lilac 1.67 rear-yellow 1.75
sauce was handout jack the gripper
sauce full back inside half front
New cross brace
Proto chassis same as schreff
thats about it