R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 11-25-2007 | 10:16 PM
  #588  
Jason Halvorson's Avatar
Jason Halvorson
Tech Elite
iTrader: (22)
 
Joined: Apr 2007
Posts: 3,955
From: Grand Forks ND
Default

Originally Posted by GRudinger
hey guys i am getting a new engine for my hyper 8 buggy!!
i am trying to decide if i should get a v-spec, jammin .21, Go tech 5p or 7p.


If i get a go should i get a 5p or a 7p?
here is my track it is pretty big!!
http://youtube.com/watch?v=brL4lmYMRZw

also i only have a thunder tiger 2035 pipe on a main it says it is the same as the ofna 053 witch looks identical to the dynamite one.
either one will work well, but the 7 port is better suited if you like big time top end speed, but if you like big bottom go with the 5 port...i run them both depending on the track...
Jason Halvorson is offline