Hi everyone,
I've two questions, one about stock motor, the second about ESC and wires.
First - motor: I want (club race rules and need to learn to drive) s stock motor and ask the LHS about an EPIC 27 single (as mentioned with club race rules) and two were available, the Epic X and the Epic XX, one without bearing, the other with. I check in Stormer website and was stuck about the amount of motor available.
Could you mention some motor use during club race and if thay have bearing?
Second - ESC & Wires:I need to wires cleanly my speedo (used QC2) and the wires are actually 13 gauges (one got this mentioned, others have the same diamater).
wallyedmonds said that:
18 gauge is good for 1/12 mod 19t stock.
And Kane-o said:
16 gauge is ideal for 1/12 as it doesn't cause tweak issues. I run 16 gauge with an 8 turn motor with no issues so it will be fine with your 13.5
But that's seem super small wires diamater. There are also some topics dedicated to ESC and wiring but they confuse me more than something else.
Do I have to wire again with 13 gauges or should I go for 12, 14, 16 or 18 gauges?
Thanks for all inputs regarding those two points.