R/C Tech Forums - View Single Post - CRC's New Generation-X.... Your Thoughts?
Old 11-02-2007, 08:08 AM
  #1079  
bigb11
Tech Elite
iTrader: (59)
 
bigb11's Avatar
 
Join Date: Jan 2006
Location: POUGHKEEPSIE,NY
Posts: 3,156
Trader Rating: 59 (100%+)
Default

Originally Posted by JB_catricala
hey guys i just thought i would post my setup from the halloween classic at the gate.

front
50 mm
with 5000 on king pin
.5 droop
10 caster
2 shim in back
short pivot balls
new brace
3.5 mm ride height
jaco purple 41.5mm

middle/rear
red center spring
25 oil in shock
20 000 in the tubes
white side springs
1 mm of droop
jaco magenta 43.5mm
3.5mm

co27
f brush-full
green/green
rollout at 44 mm

parma speed 8 lwt
about a 6 foot turn radis

i also ran this setup at vegas and it was very good.
What was your spur/pinion sizes?
bigb11 is offline