Originally Posted by RETRO RC

I'm running a 7 Port with turbo head HN 2047 pipe standard manifold novarossi cold plug 7mm restrictor in a losi 8t and I'm getting between 9 mins (heavy on the trigger or loose surface) to 12.5 min the TTR2035 pipe set was also a good combo but run time was slightly less

I'm still on the original internals at the 30 ltr (about 7.5 gallons) mark
it's about to be stripped down for new bearings conrod and maybe a pinch for good luck, even though the compression is still really good.

so anyone that tells you these are a throw away motors obviously hasn't own 1 themselves

hey MM, GenReaper, are any of you guys coming over for the New zealand nats in December heres a link if your interested

http://www.hrccc.co.nz/2007_nationals.php