Originally Posted by
Hebiki
quattro....
when i run the normal length LW arms. i run B/A suspension blocks up front with XB/D in the rear (3 deg of rear toe with 0 deg hubs.)
with the short arms, i recommend you run D/D up front with X/E in the rear. you'll have the same track width, but you'll notice the car transitions faster with the shorter EvoV arms.
ive also ran the EvoV arms with the B/A, XB/D suspension blocks then added 1mm spacers on the hubs. i couldnt tell those if there was a difference btw this set up, and the D/D, X/E set up.
- chris
Thanks for the info Chris. I also have a set of the 6mm wheel hubs that I was going to run to make-up some width.
I didn't realize the point was to remain at the same overall track width. Now that I know, I feel a little better about this set-up. The way I have it now the car is too narrow so I'll try the D/D - X/E configuration you run.
Cheers!