View Single Post
Old 10-18-2007, 12:50 PM
  #15640  
lem2
Tech Elite
iTrader: (6)
 
lem2's Avatar
 
Join Date: Oct 2001
Location: OC
Posts: 3,061
Trader Rating: 6 (100%+)
Default

Originally Posted by slomo View Post
Im using TRF shocks, the whole unit. They are about the same length as the yokomo short shock body. I dont think I'll be going back to yokomo shocks, just because tamiya shocks are much easier to take on/off and make adjustments. I was just curious if there is a clear advantahe for having the shock piston floating in oil like yokomo shocks. I have the long ends on the rear shocks and theyre fine> At full droop, the shocks are extended just about half way. Front shocks have short ends and they are fully extended before the droop screw touches the deck. Front droop is about 4-5 on the yokomo droop guage.

I'm using TRF shocks also but to solve your problem, use the YOKOMO Shock ends, so you could also use the stock YOKOMO Spring retainer. And like what the others have suggested, use the hard arms.

Also, with your Rayspeed chassis are you using the plastic towers or the Rayspeed Ones?? If not get the Rayspeed towers. like thew ones on the CGM in the link below.

look here:
CGM Chassis....
http://www.rctech.net/forum/attachme...3&d=1117469059

http://www.rctech.net/forum/attachme...2&d=1117468953

LCG Chassis
http://www.rctech.net/forum/attachme...0&d=1119882444

http://www.rctech.net/forum/attachme...1&d=1136902476

http://www.rctech.net/forum/attachme...9&d=1120324214
lem2 is offline  
Reply With Quote