Thanks
wallyedmonds

Thanks
Team Kwik

I have to add that i do like the F1 design from Bruce.
And Bruce are a great! boy.


I did Somme redesign off my good friend Magnus Ass. / Trinity design front end from Laje




to make the upper arm look better and possible lighter.

I have picture, i can post it later if you want to see.
posted above. Alf :-)

But to add damping to the frontend i had to go the way i did.

I think off making a fix upper arm, in different length and camber and caster,
sow wen you want to change the camber you change the upper arm, and
the arm will flex more like a F1 Car, putting a upper arm like the CRC or Ass. arm
together and to get it 100% alike on right and left side even i use my mill to do it.
Are virtual impossible it always get a bit off on the caster, but having a fix upper
arm you can drop the arm on any car and you very fast vill have the exact same camber
and caster on the other car, like the old Corally SP12G3. KISS. you now

Alf :-)