R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 10-09-2007 | 03:16 PM
  #27135  
6g72tt
Tech Adept
 
Joined: May 2005
Posts: 245
Default
Originally Posted by mike ivy
Hello There, 6g72tt I used to run a L4 try this setup:


Fronts Jaco Prizim Lilac's
1 degree camber
.020 front spring

Center Spring/shock run The Olive spring to start out with as the bite comes up got to the silver use 30w oil

Dampner disk's use the diff lube that came with the car Associated Siliocone grease #6636

T-plate run the .075 t-plate

Rear Jaco prizim Yellow's
Not sure what motor your running If your running thr 19t Komodo try a 96/32 or 33 with green springs and a F-brush

hope this help's
Mike
Hey Mike,

Thanks for the help. what difference will i see running the 0.75 plate as to the 0.63 plate?

Also is that gearing for tires brand new out of the box, or should i true em down, what about gluing the sidewalls? no glue, just outside or both?

1/12 is pretty new to me but i can see why people love it so much. I am running the komodo as well.

thanks
6g72tt is offline  
Reply