R/C Tech Forums - View Single Post - TC3 Forum
Thread: TC3 Forum
View Single Post
Old 11-20-2001, 07:22 AM
  #433  
TPhalen
Tech Elite
iTrader: (2)
 
TPhalen's Avatar
 
Join Date: Aug 2001
Location: Irvine, CA
Posts: 2,916
Trader Rating: 2 (100%+)
Default

Ok, well, you say that you have the 'standard' setting, which, I'm assuming, is the stock setup, and not the worlds. You can try moving the camber links to the upper inner holes (f & r). You can also try laying the front shocks down one hole.

If you are feeling really sassy, try a F-0 block on the front. This will make steering a bit more aggressive and should give you more steering through the entire corner...

Hope this helps!
TPhalen is offline