GDAY Jason
Just recived my package from your guys, 4s 4000mah and LBA10
cart note says wait an extra week for saddel pack, cheers no prob.
It got here faster than some other gear from hong kong (that i orderd 3 days before and still waiting)

Question. out of the box using Deans plugged in lipo to LBA10 taps leads, then PWR wires,,,
on the LBA10 both leds (a123 and lipo) flash 12 times, then the STATUS led starts to flash 4 times,,,, the instruction says this means error,,or is this shut down mode as well.
I have tried it a few times using the mode button.. but no change.
I have changed the tap wires from the 2+3s leads (supplied) to make one 4s lead,,as per the Techical addendum.

Checked batt voltage,15.43v, powered up aircraft Awsome pulling power 2 mins,,,,retried proccedure (to the T),same story.
I'll read the distructions a few more times,,,but i think im gonna need a little
help....
and is the CDC 7.0 ok to use as charger, as it will do lipo no probs.
Cheers