R/C Tech Forums - View Single Post - JL Racing .12
Thread: JL Racing .12
View Single Post
Old 08-22-2007 | 03:06 PM
  #666  
Team Kamikaze's Avatar
Team Kamikaze
Tech Champion
iTrader: (3)
 
Joined: Apr 2006
Posts: 8,868
From: 我的名字是沈先生。我是中国人, 居住美国
Default
Originally Posted by NitroNubee
Has anyone had one lock up on them? I broke it in properly, ran it thru several tanks after, raced it on a track and then haven't touched it in a couple weeks. I tried to fire it today and it (flywheel) would get stuck. I would loosen it and bump it again. Then it got stuck and I cannot free it. I have removed the plug and am now taking it out of the car. Any suggestions on what it could be or how I should go about checking it over?

Thanks for the help! I am really bumming because for the short time I have ran this, I have really enjoyed it. I will be truly depressed if it is broken.
Chris A.,
Try this, Take off the glow plug, then drop a few drops of after run oil thru the hole to lubricate the piston/sleeve, then using a heat gun or a hair dryer heat up the motor to about 180 degrees then fire it up.
Team Kamikaze is offline  
Reply