R/C Tech Forums - View Single Post - Calling out for TT01 Drivers!!!!
View Single Post
Old 08-02-2007, 02:00 AM
  #57  
retsilla
Tech Adept
 
retsilla's Avatar
 
Join Date: Oct 2005
Posts: 198
Default My setup TT01R

FRONT
TRF shocks (400tamiya oil) mounted on the outer hole of lower arm.
-0.5 degree camber.
Tamiya blue roll bar(lower)
6mm droop measured from the lowest point of the front arm.
Tamiya short blue springs
5mm ride height
5mm alu blue hub with 1mm blue spacer
Gear diff
UJ with 39mm alum dogbone


REAR

TRF shocks (400tamiya oil) mounted on the outer hole of lower arm.
-0.5 degree camber.
Tamiya red roll bar(lower)
5mm droop measured from the lowest point of the front arm.
Tamiya short red springs
5.5mm ride height
5mm alu blue hub with 1mm blue spacer
Gear diff
UJ with 39mm alum dogbone

Electronics
4200mah Intellect stick pack
Tamiya TEU101BK esc
Tamiya 540J motor
Sanwa 431RX
Futaba 9550
Sanwa M11

Shell
Tamiya NSX shell

Tyres
Tamiya Racing Slicks tyres(26mm)
Tamiya Ford Focus rims (26mm)
Tamiya Hard Foam

Others
Tamiya Carbon Upper deck
LRP asphalt compound
Front body mount
Tamiya TB EVO4 alum shaft
retsilla is offline