Hy !
I run on Asphalt with low grip:
Dampers: 3 Hole, 40oil, yellow all around, red rebound(things).
Chamber: 1,5° all around
Chaster: 4°
Toe in rear: 2° (Sus. Mount 1A and 1E)
Front one way
Rear upper Damper position hole 2 (if 1 is the one outside, and 5 the last inside the bulkhead)
the upper arm mounts i use the inner one all around (f+r)
Ride height f:5mm r:5,5mm.
The soft (red) swaybar all around.
droop f: 5 r: 6 (measured on the bottom of the sus Arm)
The rest positions and shims are al as inthe kit setup.
I have one hint for you. If the track is very low grip, then you can test to upper the rollcenter.
For these you can use 1mm or better for the begining 0,5mm shims under the suspension blocks, and no swaybars.
but dont forget to adjust the drop after.
Greetings from Austra