R/C Tech Forums - View Single Post - Go Tech Engines
Thread: Go Tech Engines
View Single Post
Old 07-17-2007 | 11:43 AM
  #237  
Rocket42's Avatar
Rocket42
Tech Regular
 
Joined: Aug 2005
Posts: 328
Default

Should be fine, I haven't noticed any excess carb play. just make sure that the carb pull is straight and you should be fine. I have also noticed that if the idle is backed out and you slide the throttle body out and put after run oil in the groove on the throttle and reassemble that the carb movement will be much smoother.
Rocket42 is offline