R/C Tech Forums - View Single Post - Axial Engine Spec I
View Single Post
Old 07-12-2007 | 06:41 AM
  #18  
kitracer's Avatar
kitracer
Tech Fanatic
 
Joined: Sep 2001
Posts: 986
From: hong kong
Default

Originally Posted by razzor
Why change teh head if its running ok.
My one runs at 108/111 deg/c and is happiest there but i still need more bottom punch.
Will be changing to Nova carb and see what happens.
It runs great with teh VR12+ pipe.
I think he just want to experiment with different heat sink.
The hole line up with Nova. I have tried all the NS based and all the Max and they all fit and I will try the OS magnesium when it comes out.
Razzor, I believe you run 16%, I would try get it to run up to 120 ( meas when the tank almost empty). I run 25% here and in Summary(temp 33c plus) , I run it up to 120 to 125. In winter ( temp 15 to 20) I run up to 100.

I am using a new version of the HEC pipe with a smaller manifold, good power and run time cause of the increased Torque.

Last edited by kitracer; 07-12-2007 at 06:59 AM.
kitracer is offline