R/C Tech Forums - View Single Post - Ninja Engine by GRP
View Single Post
Old 07-02-2007 | 09:26 AM
  #960  
Sirio2127's Avatar
Sirio2127
Tech Regular
iTrader: (1)
 
Joined: Jun 2005
Posts: 379
From: The land of two heads
Default

Originally Posted by wallyedmonds


and with these motors i really believe that you need a bench to do the break in properly. and the nitro% low and the oil high.
I will be honast i have no exprence running ninja engines but i agree with you every manufacture is difrent. I would never run a novarossi engine in like i use to do with a sirio. Sirio engines did not cope well with a long brake-in probaly because of the difrent materials used in the piston itself. Novarossi is difrent agen. From what i see with the ninja people constantly over tune the engine to try to get bottom end power. Were as from my view they should look at gearing and clutch rather then leaning hard on an engine trying to find somthing that will never come with out the clutch and gearing suiteing the engines powerband. I made my orignal post because i know ryan and have seen the engine run. Best Regards Jeremy.
Sirio2127 is offline