Originally Posted by
opposite lock
Maybe the pinch bolt has a short thread.So even though you have tightened
it thinking it is tight perhaps the nut is against the end of the threading.Try a small washer between crankcase and nut on thread and tighten it down.Then see what happens.
Yes, it was answered before but thank you anyway. I appreciate your willingness to help. I actually shortened both pieces (on the curved ends) so that it will be tight before the 2 pinch pieces touch together. It's very tight now. Before, I could move the carb with a little force when the pinch bolt was as tight as I could get it. Now, I snugged it and I can't move the carb at all. I have yet to test it but I feel really good about the fix.