R/C Tech Forums - View Single Post - Barracuda from Alex racing
View Single Post
Old 04-16-2003, 01:45 PM
  #1967  
JDM_DOHC_SiR
Tech Champion
iTrader: (31)
 
JDM_DOHC_SiR's Avatar
 
Join Date: Aug 2002
Location: Chula Vista, CA
Posts: 9,087
Trader Rating: 31 (100%+)
Default Re: CUDA setups...lets share

Originally posted by RedBullFiXX
Hello DAVE...and all the rest of the CUDA gang.

Wanger, Madjack & I have been coming up with some pretty good stuff on the CUDA lately as we all run a different setup at So-cal. Just curious what you folks have found to be of use, particulary the stuff that's a bit uncharted ? ? ?

Last night at the races (admittedly the So-Cal banking is not the norm) I found that 2mm of roll center did wonders for stability with the shock positioned at the outside holes top & bottom for MAX steering. And it seems that rear anti-squat is not a friendly setup for the CUDA (too much on power steering)

Later this eve hope to have time to post latest set-up sheet.
Quick list...
Motor/Gear=Reedy Spec19T 72/28
Std springs
Toe Fr=0deg, Rr 2deg
ride height Fr=5mm, Rr 5.5mm
Sway bars Fr=1.0, Rr 1.0
Shocks=1mm holes in pistons Fr 50wt, Rr 40wt.
Diff=One-Way

So-Cal
Indoor, Asphalt, High bite with banking.
Looks similar to what I have for a out door track but the STD springs are way to soft for me

-Dave
JDM_DOHC_SiR is offline