Old 05-29-2007, 01:07 PM
 
cola
Tech Elite
iTrader: (308)
 
cola's Avatar
 
Join Date: Mar 2005
Location: Willoughby, Ohio
Posts: 3,261
Trader Rating: 308 (100%+)
Default

Originally Posted by Trixter
Would somone post a complete setup sheet for one of the lipo powered Losi XXXT MF2?

Thanks
This is what I am running. But I have added 2oz of weight to it and I am running the xxxt MF1 rear with GEN1 trans. I added the weight in the battery tray, I put 1oz of weight under the front battery foam and 1oz under the rear battery foam. I was running the setup on a very rutted and dusty track and it was very fast.

FRONT
toe: -1*
Ride Height: Arms level
Camber: -1*
Caster: Stock
Sway Bar: None
Oil: 30wt
Piston: 56 (Standard)
Spring: Red
Limiters: .050
Spindle Location: Bottom
Camber Link: 2b
Washers: 1 washer under ball stud
Shock Location: Middle, 2
Bellcrank: Outside
Arms: Long Mode




REAR


Toe: 3*
Ride Height: Bones level
Camber: -1*
Anti squat: 2*
Rear Hub Spacing: Center
Sway Bar: None
Oil: 30wt
Piston: 56 (standard)
Spring: Yellow
Limiters: None
Drive Shafts: CVDs---------- Steel
Rear Cmaber Link: 2b
Rear Shock Location: 2, Middle
Arms: Short Mode

Gearing: 17/87
Motor: Novak 6.5
Battery: Middle (6000mah)
Body: Losi MF2
Spoiler: Stock


Notes: I am running an Associated B4 spur gear and slipper pads.







Hope this helps,
David
cola is offline  
Reply With Quote